Шью одином3 1, 85, дает такую вот ошибку,
<id:0/003> Added!
<osm> Enter CS for MD5.
<osm> Check MD5.Do not unplug the cable.
<osm> Please wait.
<osm> DefaultCalDataWithBoot_S5360XXKK5_REV05.tar.md5 is valid.
<osm> PDA_S5360XXKK6_REV05.tar.md5 is valid.
<osm> GT-S5360-MULTI-CSC-OXEKK1.tar.md5 is valid.
<osm> MODEM_S5360XXKK5_REV05.tar.md5 is valid.
<osm> Checking MD5 finished Sucessfully.
<osm> Leave CS.
<id:0/003> Odin v.3 engine (ID:3)..
<id:0/003> File analysis.
<id:0/003> SetupConnection.
<id:0/003> Initialzation.
<id:0/003> Set PIT file.
<id:0/003> DO NOT TURN OFF TARGET!
<id:0/003> Get PIT for mapping.
<id:0/003> Firmware update start.
<id:0/003> BcmBoot.img
<id:0/003> NAND Write Start!
<id:0/003> HEDGE_NVRAM8_RF_LE.bin
<id:0/003> sysparm_dep.img
<id:0/003> Sbl.bin
<id:0/003> boot.img
<id:0/003> system.img
<id:0/003> userdata.img
<id:0/003> param.lfs
<id:0/003> csc.rfs
<id:0/003> Transmission Complete.
<id:0/003> Now Writing. Please wait about 2 minutes
<id:0/003> Receive Response form LOKE
<id:0/003> BcmCP. img
<id:0/003>
<id:0/003> Complete(Write) operation failed.
<osm> All threads completed. (succeed 0 / failed 1)
прошивка S5360XEKK6
>>> Что делать не могу прошить андроид?
